E-text prepared by Peter Yearsley, Josephine Paolucci, and the Project Gutenberg Online Distributed Proofreading Team (https://www.pgdp.net/)
Note: Project Gutenberg also has an HTML version of this file which includes the original illustrations and in which the chemical equations are easier to read. See 18751-h.htm or 18751-h.zip: (https://www.gutenberg.org/dirs/1/8/7/5/18751/18751-h/18751-h.htm) or (https://www.gutenberg.org/dirs/1/8/7/5/18751/18751-h.zip)
Transcriber's Note:
Text:
Words surrounded by a tilde such as ~this~ means the word is in bold face.
Words surrounded by underscores like this means the word is in italics in the text.
Letters in brackets with an = sign before it means that the letters have a macron over them, e.g. H[=A=c] signifies that the Ac has a macron over it.
Numbers and equations:
Parentheses have been added to clarify fractions.
Underscores before bracketed numbers in equations denote a subscript.
Superscripts are designated with a caret and brackets, e.g. 11.1^{3} is 11.1 to the third power.
The symbol .'. designates the symbol usually used for therefore (three periods in a triangle shape).
A down arrow is represented by a vertical line over a capital
V. Like this: |
V
Minor typographical errors have been corrected. Footnotes have been moved to the end of the chapter, and all advertisements have been moved to the end of the book.
A TEXT-BOOK OF ASSAYING:
FOR THE USE OF THOSE CONNECTED WITH MINES.
by
C. AND J. J. BERINGER.
Revised by
J. J. BERINGER,
Assoc. of the Royal School of Mines; Fellow of the Chemical Society and of the Inst. of Chemistry; Principal of the Camborne Mining School; and Late Public Analyst for the County of Cornwall.
With numerous Diagrams and Tables.
Ninth Edition.
London:
Charles Griffin and Company, Limited,
Exeter Street, Strand.
1904.
[All rights reserved.]
PUBLISHER'S NOTE TO THE NINTH EDITION
The continued popularity of the present work, the last edition of which was published only a little over a year ago, continues to be a source of gratification to the publishers, who have much pleasure in issuing the present edition.
January 1904.
PREFACE TO THE SIXTH EDITION
The principal changes in this edition are additions to the articles on Gold, Cyanides, and Nickel, and a much enlarged Index. The additional matter covers more than forty pages.
J. J. BERINGER.
CAMBORNE,
January 1900.
PREFACE.
The Text-book now offered to the public has been prepared to meet the existing want of a practical "handy book" for the Assayer.
To mining men the word "assaying" conveys a sufficiently clear meaning, but it is difficult to define. Some writers limit it to the determination of silver and gold, and others imagine that it has only to do with "furnace-work." These limitations are not recognised in practice. In fact, assaying is becoming wider in its scope, and the distinction between "assayers" and "analysts" will in time be difficult to detect. We have endeavoured rather to give what will be of use to the assayer than to cover the ground within the limits of a faulty definition.
At first our intention was to supply a description of those substances only which have a commercial value, but on consideration we have added short accounts of the rarer elements, since they are frequently met with, and occasionally affect the accuracy of an assay.
Under the more important methods we have given the results of a series of experiments showing the effect of varying conditions on the accuracy of the process. Such experiments are often made by assayers, but seldom recorded. Statements like those generally made--that "this or that substance interferes"--are insufficient. It is necessary to know under what conditions and to what extent.
Students learning any particular process cannot do better than repeat such a series of experiments. By this means they will, at the same time, acquire the skill necessary for performing an assay and a confidence in their results based upon work under different conditions.
The electrolytic method of copper assaying given under Copper is a modification of Luckow's; it was introduced by us into the offices of the Rio Tinto Copper Company, and has been in use for many years with success. This modification is now employed in copper-works in Spain, Germany, and England, and is used in place of the dry assay for the commercial valuation of copper ores.
We have adhered to the gram and the "c.c." as the units of weight and volume. Those who prefer working with grains and grain-measures can use the figures given, multiplied by ten. For example:--When 1 gram is mentioned, 10 grains should be used, and 10 grain-measures take the place of 1 "c.c." It is not advisable to mix the two systems, as by using gram weights and grain-measures.
We have intentionally to a large extent omitted to mention the names of those who have originated or modified the various processes. The practice of naming a process after its discoverer has developed of late years, and is becoming objectionable. It is a graceful thing to name a gas-burner after Bunsen, or a condenser after Liebig; but when the practice has developed so far that one is directed to "Finkenerise" a residue, or to use the "Reichert-Meissl-Wollny" process, it is time to stop.
We are indebted to the standard works of Allen, Crookes, Fresenius, Lunge, Michell, Percy, and Sutton, and wish to express our sense of special indebtedness to Mr. Richard Smith, of the Royal School of Mines. One or two of the illustrations are taken from Mr. Sexton's excellent little book on Qualitative Analysis. Our obligation to some others is mentioned in the text.
Finally, we have to thank for assistance in the experimental work Messrs. Bailey, Beswick, Clarke, Grant, Higgins, and Smith.
THE AUTHORS.
CAMBORNE, Nov. 1889.
CONTENTS.
PART I.
CHAPTER I.
INTRODUCTORY. Page Object of assaying 1 Sampling 1 Drying: determination of moisture 5 Calculation and statement of results 7 Laboratory books and report forms 9 Quantity to be taken for an assay 11 Exercises 14
CHAPTER II.
METHODS OF ASSAYING.--DRY GRAVIMETRIC METHODS.
Methods of assaying 15 Gravimetric methods 15 Mechanical separations 16 Dry assays 16 (a) Fluxes 16 (b) Reducing agents 21 (c) Oxidising agents 22 (c) Apparatus 24
CHAPTER III.
WET GRAVIMETRIC METHODS.
Wet gravimetric methods 27 (a) Solution 29 (b) Precipitation 30 (c) Filtration 31 (c) Drying and igniting 32
CHAPTER IV.
VOLUMETRIC ASSAYS.
Titrometric assays 35 (a) Standard solutions 36 (b) Standardising 37 (c) Methods of working 42 (c) Indirect titration 43 Colorimetric assays 44 Gasometric assays 44
CHAPTER V.
WEIGHING AND MEASURING.
Weighing 47 Measuring liquids 49 (a) Graduated flasks 49 (b) Pipettes 50 (c) Burettes 51 Measuring gases 52
CHAPTER VI.
REAGENTS.
Acids, &c. 54 Bases, salts, &c. 59
CHAPTER VII.
Formulæ, equations, &c. 68
CHAPTER VIII.
SPECIFIC GRAVITY.
Introductory 75
Determination of specific gravity-- (a) Hydrometers 76 (b) Specific gravity bottles 78 Calculations depending on specific gravity 84
PART II.
CHAPTER IX.
SILVER, GOLD, PLATINUM, CYANIDES, MERCURY.
SILVER--Detection 87 Dry assay 87 (1) Scorification 88 (2) Pot assays, average ores 90 " ores with metallic oxides 91 " ores with metallic sulphides 91 Explanatory notes on the fusion 93 The effect of charcoal, flour, &c. 94 The effect of nitre 95 The effect of mineral sulphides 95 (3) Cupellation 98 The loss of silver 101 Condition affecting the loss 102 Methods of correction 103 Lead required for cupellation 105 (4) Calculation of the results in ounces to the ton of 2240 lbs. Table 107 Ores with metallic particles 108 (5) Explanatory notes 110 (6) Examples of dry silver assays 113 Wet assays 116 Gravimetric method 117 Gay-Lussac's method 119 Volhard's method 121 A modified Gay-Lussac 123 Volhard's method applied to arsenic 124 GOLD--Detection 126 Amalgamation assay 126 Dry assay 127 (1) Size of charges 127 (2) Sampling 127 (3) Assay tons 131 (4) Small buttons, weighing 131 " " measuring 133 (5) Concentration in lead 136 Quartz ores 136 Ores with oxide of iron 138 Ores with metallic sulphides 139 (6) Cyanide charges, residues, &c. 140 (7) Cupellation 142 Cupels 142 Cupellation temperature 143 Cupellation loss 145 (8) Inquartation 146 (9) Flatting 149 (10) Parting, in flasks 151 " in test tubes 152 " in glazed crucibles 153 " Loss, &c. 154 (11) Check assays, surcharge 154 (12) Bullion assays in special apparatus 156 Silver, &c., in gold bullion 157 (13) Sampling of base bullion, &c. 157 CYANIDES--Commercial cyanides 160 Double cyanides 161 Prussic acid 162 Gold-dissolving power of cyanide liquor 162 Assay for cyanide strength 163, 165 Assay of commercial cyanide 167 Alkalinity of cyanides 167 Acidity of ores 168 Metals in cyanide liquors 169 Cyanicides 169 PLATINUM 170 IRIDIUM 171 MERCURY 171 Dry assay 172 Wet method 173
CHAPTER X.
COPPER, LEAD, THALLIUM, BISMUTH, ANTIMONY.
COPPER--Introductory 175 Dry assay 176 Valuation of copper ores 181 Wet methods 183 (1) Electrolytic assay 184 Volumetric methods 194 (1) Cyanide method 194 (2) Iodide method 199 (3) Colorimetric method 203 Examination of commercial copper 205 LEAD 211 Dry assay 211 Wet assay 213 (1) Gravimetric method 213 (2) Volumetric method 214 (3) Colorimetric method 218 THALLIUM 219 BISMUTH 220 Dry assay 221 Wet method 221 (1) Gravimetric determination 222 (2) Colorimetric assay 223 ANTIMONY 225 Dry assay 225 Wet method 227 (1) Gravimetric assay 228 (2) Volumetric method 229
CHAPTER XI.
IRON, NICKEL, COBALT, ZINC, CADMIUM.
IRON 231 Gravimetric determination 233 Permanganate and bichromate methods 234 Stannous chloride method 244 Colorimetric determination 247 NICKEL 251 Dry assay 251 Electrolytic assay 254 Titration by cyanide 255 COBALT 259 ZINC 261 Gravimetric method 262 Volumetric method 263 Gasometric method 266 CADMIUM 269
CHAPTER XII.
TIN, TUNGSTEN, TITANIUM.
TIN 271 Vanning 273 Dry assay 276 Detection, &c. 279 Gravimetric determination 281 Volumetric determination 282 Examples 284 TITANIUM 292 TUNGSTEN 295 NIOBIC AND TANTALIC OXIDES 297
CHAPTER XIII.
MANGANESE, CHROMIUM, ETC.
MANGANESE 298 Gravimetric determination 300 Volumetric determination 300 Ferrous sulphate assay 301 Iodine assay 302 Colorimetric determination 306 CHROMIUM 307 VANADIUM 310 MOLYBDENUM 311 URANIUM 312
CHAPTER XIV.
EARTHS, ALKALINE EARTHS, ALKALIES.
ALUMINA 314 THORIA 317 ZIRCONIA 317 CERIUM 318 LANTHANUM AND DIDYMIUM 319 YTTRIA 319 BERYLLIA 319 LIME 320 STRONTIA 324 BARYTA 326 MAGNESIA 328 THE ALKALIES 330 SODIUM 334 POTASSIUM 336 LITHIUM 338 CÆSIUM 339 RUBIDIUM 340 AMMONIUM 340
PART III.
CHAPTER XV.
OXYGEN AND OXIDES--THE HALOGENS.
OXYGEN 344 OXIDES 345 WATER 350 THE HALOGENS 358 CHLORINE 359 BROMINE 361 IODINE 362 FLUORINE 363
CHAPTER XVI.
SULPHUR AND SULPHATES.
SULPHUR 367 Gravimetric determination 369 Volumetric determination 370 SULPHATES 377 SELENIUM 379 TELLURIUM 379
CHAPTER XVII.
ARSENIC, PHOSPHORUS, NITROGEN.
ARSENIC 381 Gravimetric determination 383 Volumetric method, "iodine" 384 " " "uranic acetate" 389 PHOSPHORUS 394 Gravimetric determination 396 Volumetric determination 397 NITROGEN AND NITRATES 400
CHAPTER XVIII.
SILICON, CARBON, BORON.
SILICON AND SILICATES 405 CARBON AND CARBONATES 414 COALS 418 SHALES 420 CARBONATES 424 BORON AND BORATES 429
APPENDIX A.
Table of atomic weights and other constants 433 Table for converting degrees of the centigrade thermometer into degrees of Fahrenheit's scale 435 Tables showing strengths of aqueous solutions of nitric and hydrochloric acids, of ammonia and of sulphuric acid 436
APPENDIX B.
Estimation of small quantities of gold 440 Practical notes on the iodide process of copper assaying 441 Method of separating cobalt and nickel 442
APPENDIX C.
A lecture on the theory of sampling 444
INDEX 450
A TEXT-BOOK OF ASSAYING.
CHAPTER I.
INTRODUCTORY.
Assaying has for its object the determination of the quantities of those constituents of a material which add to or detract from its value in the arts and manufactures. The methods of assaying are mainly those of analytical chemistry, and are limited by various practical considerations to the determination of the constituents of a small parcel, which is frequently only a few grains, and rarely more than a few ounces, in weight. From these determinations calculations are made, which have reference to a mass of material of, perhaps, hundreds of tons. But in all cases, whether the mass under consideration be large or small, whether the material be obtained by mining, grown, or manufactured, the assayer is supposed to receive a small quantity, called "the sample," which is, or ought to be, the exact counterpart of the mass of material that is being dealt with. The taking and making of this sample is termed "sampling"; and the men whose special work it is to select such samples are "the samplers."
But although "sampling" is thus distinct from "assaying," the assayer should be familiar with the principles of sampling, and rigorous in the application of these principles in the selecting, from the sample sent him, that smaller portion upon which he performs his operations.
~Sampling.~--In the case of gases, there is absolutely no trouble in mixing. The only difficulty is in drawing off a fair sample where, as in flues, the body of the gas is in motion, and varies a little in composition from time to time. In this case, care must be taken to draw off uniformly a sufficient volume of the gas during a prolonged period; any portion of this larger volume may then be taken for the analytical operation.
In the case of liquids, which mix more or less easily--and this class includes metals, &c., in the state of fusion--more or less severe agitation, followed by the immediate withdrawal of a portion, will yield a fairly representative sample.
In the case of solids, the whole mass must be crushed, and, if not already of fairly uniform quality, mixed, before sampling can take place. Most of the material which a sampler is called upon to deal with, is, however, in a more or less divided state and fairly uniform. In practice it is assumed that 5 per cent. of the whole (= 1/20th), if taken in portions of equal weight and at frequent and regular intervals, will represent the mass from which it was taken. Taking a heap of ore, A, and selecting one out of every twenty spade-, bag-, barrow-, or wagon-fuls, according to the quantity of stuff in the heap, there is obtained a second heap, B, containing one-twentieth of the stuff of the heap A. If we crush the stuff in B until this heap contains approximately the same number of stones as A did--which means, crushing every stone in B into about twenty pieces--B will become the counterpart of A. Selecting in the same manner 5 per cent. of B, there is got a third heap, C. This alternate reduction and pulverising must be carried on until a sample of suitable size is obtained. This may be expressed very clearly thus:--
A = 1000 tons of rocks and lumpy ore. B = 50 " " rough stones, 1/20th of A. C = 2.5 " " small stones, 1/20th of B. D = 0.125 " " coarse powder, 1/20th of C.
FIG. 1. CONE PARTLY REDUCED CONE PLAN OF FRUSTRUM DIVIDED. ELEVATION OF FRUSTRUM DIVIDED.
If the material to be sampled is already a dry powder, 5 per cent. of it should be heaped in a cone; each lot being added on the apex of the cone already formed, so that it may distribute itself by falling evenly in all directions. When the cone is completed, convert it into a low frustrum of a cone by drawing stuff uniformly and in a direct line from the centre to the circumference. Draw two diameters at right angles to each other, and reserving any two alternate quarters, reject the others. Mix; and form another cone, and proceed until a sample is got of the bulk required.
This is the usual plan, and all samples should be treated in this way when the stuff is fine enough to fall evenly down the sides of a cone.
Samples as they reach the assay office are seldom in a fit state for the work of the assayer; they are generally too coarse, and ought always to be more than he wants for any particular determination. The portion he requires should never be taken at hap-hazard; the sample must be reduced systematically to the quantity required.
1. If the sample is a liquid: it is sufficient to shake the bottle, and take out a measured or weighed quantity for the assay.
2. If a liquid with a solid in suspension: measure the whole of it. Filter. Make up the filtrate with the wash-water or water to the original bulk. Assay it. Dry and weigh the residue, and make a separate assay of it.
3. If of a creamy consistency, free from heavy particles: mix well; spread out evenly on a glazed tile. Take up equal portions at equal distances. Mix and assay.
4. If a mud of coarse and fine particles, or of particles of unequal density: weigh and transfer to a porcelain dish, or weigh in the dish. Dry at 100° C., weigh. Treat the residue as a solid capable of being powdered.
5. If a solid capable of being powdered, or already powdered: heap up into a cone; flatten with a spatula; divide along two diameters at right angles, and carefully reject the whole of two alternate quarters, brushing away any fine powder. Mix the other quarters, and repeat (if necessary). For small quantities a fine state of division is essential.
6. If a solid with metallic particles: powder and pass through a sieve; the metallic particles will not pass through. Weigh both portions and assay separately. Sifting should be followed by a very thorough mixing.
7. If a metal or alloy in bar or ingot: clean the upper surface of the bar, and bore through the bar. Use the borings. If the ingot or bar is small, cut it through and file the section. Filings must be freed from fragments of the file by means of a magnet; and from oil, if any be present, by washing with a suitable solvent.[1] Where practicable, metals and alloys are best sampled by melting and granulating. The student must carefully avoid any chance of mixing dirt or particles of other samples with the particular sample which he is preparing. One ore should be done at a time, and when finished, it should be labelled and wrapped up, or bottled, before starting on a fresh sample.
When an ore requires to be very finely ground in an agate mortar, it is often advisable to mix with a little pure alcohol and rub until free from grit; dry at 100° C. and mix well before weighing.
When an assay is required of a quantity of ore made up of parcels of different weight and quality, each parcel should be separately sampled and parts of each sample, bearing to each other the same proportion by weight as the original parcels, should be taken and mixed. For example, a lot of ore is made up of one parcel of A, 570 tons, one of B, 180 tons, and another of C, 50 tons; a sample representing the whole may be got by mixing 57 parts of a sample of A with 18 parts of a sample of B, and 5 parts of a sample of C.
FIG. 2.
A bruising plate, like that in fig. 2, is convenient for general office work. The slab is of cast iron, about an inch thick. It is firmly supported on a solid block of wood, and pivoted for convenience in emptying. The bruising-hammer is steel-faced, about 4 inches square, and 1-1/2 inch thick. The block is firmly fixed to a small table or tressel, so that the slab is about 2 feet 6 inches from the ground. The slab is cleaned, and the sample collected with the help of a stiff-haired brush.
~Drying: Determination of Moisture.~--In practice, the moisture is generally determined by the samplers, and the proportion is specified in grains per pound on the label attached to the sample when it reaches the assay office. The method adopted is usually to dry 1 lb. = 7000 grs. of the ore in a frying-pan heated over a gas flame, or in an ordinary oven, until a cold bright piece of metal or glass is no longer damped when held over it. The loss of weight in grains = moisture.
Properly, however, this work should be done by the assayer, if only for the following reason. It is assumed that the dry ore of the sampler and of the assayer are the same thing; according to the nature of the ore, this may or may not be the case. The assayer, however, uses the sample which he has dried for his moisture-determination, as the dry ore on which he makes his other assays, and no variation in moisture would influence the other and more important determinations. Some ores are sent to the smelter with from 5 to 15 per cent. of adherent water. In these cases it is best to spread out the sample, and taking equal portions fairly at regular intervals, weigh into a Berlin dish 20 grams. This should then be dried over a sand-bath, or if the ore is likely to be injured by excess of heat, over a water-bath until the weight is constant. The loss of weight multiplied by 5 gives the percentage of water present.
Example:--
Weight of dish + wolfram 32.67 grms.
" " dish 12.67 "
-----
" " wolfram 20.00 "
" " dish + wolfram 32.67 "
" " " dried 30.15 "
-----
" " water 2.52 "
2.52 × 5 = 12.6 ~12.6%.~
There are other ores which are not apparently wet, but in the state called "air-dried." It is easier to take fair samples of these, and, consequently, it is not necessary to use so large a quantity as 20 grams. But with a smaller quantity, extra precautions must be taken. All dry solids at ordinary temperatures absorb moisture from the air. The amount varies with the nature of the material and with the quantity of surface exposed. Light bulky powders absorb more than heavy ones, because of the greater condensing surface. It is on this account that it is well to weigh substances, which have been dried, between close-fitting watch-glasses. The method of determining moisture is to weigh out into the glasses 5 grams of ore, and dry in the water-oven until there is no further loss of weight. On taking the glasses out of the oven, they should be at once closed, the clip put on, and after cooling in a desiccator weighed. If after a second trial the loss is the same, or only increased by a milligram, the determination is finished.
Example:--
Weight of glasses + pyrites 31.0470 grms. " " glasses 26.0470 " ------- " " pyrites 5.0000 " " " glasses + pyrites, dried 1 hour 30.8965 " " " " " dried 1-1/2 " 30.8957 " " " " " 31.0470 " " " " " dried 30.8957 " ------- " " moisture 0.1513 "
0.1513 × 20 = 3.026 ~3.02%.~
FIG. 3.
Sometimes it may be advisable to dry 10 grams, in which case multiplying the loss by 10 will give the percentage. The dried ore should be transferred to a weighing-tube (fig. 3), and reserved for the subsequent determinations. The weighing-tube with the ore must be marked, and kept in a desiccator.
Most ores and inorganic substances can be dried, and their moisture determined by the loss in this way. When, however, the substance contains another somewhat volatile ingredient, it is exposed over sulphuric acid in a desiccator for two days (if in vacuo, all the better), and the loss determined. Moisture in dynamite should be determined in this way.
When water is simply mechanically mixed with a substance it presents but little difficulty. The combined water is a different matter. Slaked lime, even when perfectly dry, contains much water; and if the water of soda crystals were separated and frozen, it would occupy a volume equal to that of the original crystals. Perfectly dry substances may contain much water, and this combined water is retained by different materials with very unequal vigour. Sodium sulphate and sodium phosphate crystals lose water even when exposed under ordinary conditions to dry air. Soda crystals when heated melt, and at a moderate temperature give off their water with ebullition. The temperature at which all the water is given up varies with each particular salt; the actual determination of the water in each case will require somewhat different treatment. Such determinations, however, are seldom required; and from a practical point of view this combined water causes no trouble.
In assaying ores, we term "moisture" all water which is lost by exposure in a water-oven at 100° C., and the "dry ore" is the ore which has been dried at this temperature. No advantage, but rather endless confusion, would be caused by varying the temperature with the object of estimating the whole of the water which a hydrated salt may contain. The results of the assay of the other components should be calculated on the "dry ore." One advantage of this is obvious:--The dry ore has a constant composition, and the results of all assays of it will be the same, no matter when made; the moisture, however, may vary from day to day, and would be influenced by a passing shower of rain. It is well to limit this variability to the moisture by considering it apart, and thus avoid having the percentage, say, of copper rising and falling under the influence of the weather.
In the case of certain salts, however, such as soda crystals and hydrated sulphate of copper (when these constitute the bulk of the substance to be assayed), it is as well to perform the assay on the moist, or at any rate air-dried, substance.[2] It would be equally convenient to calculate on the substance dried at 100° C.; but in this case it would be well, in order to avoid a somewhat shallow criticism, to replace the term "moisture" by the longer but equivalent phrase "water lost at 100° C."
~Calculation and Statement of Results.~--By far the most generally convenient method of stating the results of an assay is that of the percentage or parts in a hundred, and to avoid a needlessly troublesome calculation it is well to take such a quantity of ore for each assay as by a simple multiplication will yield the percentage. In these calculations decimals are freely employed, and students should make themselves familiar with the methods of using them.
Other methods of statement are in use, and have advantages in certain special cases. With bullion the parts in a thousand are given, and in those cases in which the percentage is very small, as in water analysis, it is convenient to report on parts in 100,000, or even on parts per 1,000,000. These are easily got from the corresponding percentages by shifting the decimal point one, three, or four places to the right. Thus 92.5 per cent. is 925 per thousand; and 0.0036 per cent. is 3.6 per 100,000, or 36 per million.
With ores of tin, silver, and gold, the result is stated as so many cwts., lbs., or ozs., in the ton. With dressed tin ores as they are sent to the smelter, the produce is given in cwts. and quarters to the ton. The corresponding percentage may be obtained by multiplying by five; or, inversely, if the percentage is given, the produce may be got by dividing by five. A produce of 13-1/2 equals a percentage of 13.5×5 = 67.5; and a percentage of 70.0 equals a produce of 70/5 = 14. With tin ores as raised (in which the percentage is small) the reduction must be carried to pounds per ton. One per cent. equals 22.4 lbs. to the ton; consequently, if we multiply the percentage by 22.4, the produce will be given. Thus, if an ore contains 6.7 per cent. of oxide of tin, the produce is 6.7×22.4 = 150 lbs. (or 1 cwt., 1 quarter, and 10 lbs.) to the ton. With gold and silver ores, the proportion of precious metal is small, and it is necessary to carry the reduction to ozs. and dwts. to the ton; and since gold and silver are sold by troy weight, whilst the ton is avoirdupois, it is of importance to remember that the ounces in the two systems are not the same. A ton contains 15,680,000 grains, which equal 653,333.3 dwts. or 32,666.6 ozs. (troy). The following rules are useful:--
To get ozs. (troy) per ton, multiply parts per 100,000 by 0.327; To get dwts. per ton, multiply parts per 100,000 by 6.53; To get grains per ton, multiply parts per 100,000 by 156.8.
Where liquids are being assayed, cubic centimetres are held to be equivalent to grams, and the usual method of statement is, "so many parts by weight in so many by measure." Where the statement is made as grams per litre or grains per gallon, there can be no doubt as to what is meant; and even if it be expressed in parts per 100,000, parts by weight in a measured volume must be understood unless the contrary is expressly stated.
In some cases, where the density of the solution differs greatly from that of water, the percentage by weight may be given; and in others, mixtures of two or more liquids, the percentages may be given by volume or by weight; as so many c.c. in 100 c.c., or as so many grams in 100 grams, or even as so many grams in 100 c.c. In such cases it must be distinctly shown which method of statement is adopted.
One grain per gallon means 1 grain in 70,000 grain-measures, or one part in 70,000. Dividing by 7 and multiplying by 10 will convert grains per gallon into parts per 100,000. Inversely, dividing by 10 and multiplying by 7, will convert parts per 100,000 into grains per gallon.
Grams per litre are parts per 1000; multiplying by 100 will give parts per 100,000, and multiplying by 70 will give grains per gallon.
Among foreign systems of weights, the French is by far the best. Kilograms (2.205 lbs.) per quintal (220.5 lbs.) are parts per cent.; and grams (15.43 grs.) per quintal are parts per 100,000. From the rule already given, grams per quintal may be converted into ounces to the ton by multiplying by 0.327.
The German loths per centner (1/2 oz. (avoirdupois) to 100 lbs.) equal parts per 3200; they are converted into parts per cent. by dividing by 32, or into ounces (troy) per ton by multiplying by 10.208.
In the United States, as a sort of compromise between the avoirdupois and metric systems, a ton is taken as 2000 lbs. There, too, the custom is adopted of reporting the gold and silver contents of an ore as so many dollars and cents to the ton. In the case of gold, an ounce is considered to be worth 20.6718 dollars. With silver, the nominal value is 1.2929 dollars per ounce, but frequently in assay reports it is taken as one dollar. The practice is objectionable. The prices of metals vary with the fluctuations of the market, and if the assayer fixed the price, the date of his report would be all important; if, on the other hand, he takes a fixed price which does not at all times agree with the market one, it leaves a path open for the deception of those unacquainted with the custom. American "dollars on the ton of 2000 lbs." may be converted into "ounces in the ton of 2240 lbs." by dividing by 1.1544 in the case of silver, and by 18.457 in the case of gold.
~Laboratory Books and Report Forms.~--The record which the assayer makes of his work must be clear and neat, so that reference, even after an interval of years, should be certain and easy. One method should be adopted and adhered to. Where there are a large number of samples, three books are required.
Sample Book.--This contains particulars of the samples (marks, &c.), which are entered by the office-clerk as they arrive. He at the same time puts on each sample the distinguishing number.
EXAMPLE OF PAGE OF SAMPLE BOOK.
+----------+----------+--------------------------+----------------+ | Date. | Number. | Sample. | Remarks. | +----------+----------+--------------------------+----------------+ | Feb. 1 | 482 | Tough Copper | For Arsenic. | | " 2 | X | Piece of Metal | For Ni and Cu. | | " | 483 | Tough Copper. | | | " | 73 | Silver Precipitate, | With Letter. | | | | 4 casks, 24 cwt. 1 qr. | | | " | 494 | Purple Ore, 200 tons. | | | " | 1 J.T. | Lead Ore, 1 J.T. | From Corsica. | | " | 2 J.T. | " 2 J.T. | | +----------+----------+--------------------------+----------------+
Laboratory Book. This is the Assayer's note-book, in which he enters clearly the particulars of his work--the results obtained, as well as how these results were arrived at. The calculations should be done on scrap-paper, and should not be entered, although, of course, detail enough must be shown to enable the results to be recalculated.
EXAMPLE OF PAGE OF LABORATORY BOOK. ______________________________________________________________
Purple Ore 5 grams 19/10/89 0.0042 grm. 0.0021 " ------ Colorimetric 0.0063 × 20 = 0.13% Copper ______________________________________________________________
482 Tough Copper 10 grams Feb. 1/89 10.5 c.c. Uranium. = 0.52% Arsenic ______________________________________________________________
2082 Tough Copper 10 grams 12.7 c.c. Uranium. = 0.63% Arsenic ______________________________________________________________
491 10 grams Tough Copper 13.7 c.c. Uranium Feb. 1/89 = 0.68% Arsenic ______________________________________________________________
Standard of Uranium acetate.
0.150 gram As_{2}O_{3} = 23.3 c.c. Uranium.
.'. 100 cc. Uranium = 0.5 gram As.
______________________________________________________________
10071 5 grams Tin Ore Cruc. and SnO_{2} 9.6065 grms. Feb. 3/89 Cruc. and Ash 9.4235 " ------ SnO_{2} = 0.1830 = 2.88% Tin ______________________________________________________________
The Assay Book.--This is the Official book, and is a combination of the Sample and Laboratory books. It corresponds with the report-forms. Without being loaded with detail, it should contain sufficient to characterise each sample.
Key to following example page of Assay book:
DR = DATE REPORTED.
Not Det. = Not detected
EXAMPLE OF PAGE OF ASSAY BOOK.
-------------------------------------------+----+-------+---------------+---- DESCRIPTION OF SAMPLE. | | Water | Assay on | ------+--------------------+---------------| |Lost at| the Dry | Date. | Material. | Weight. |No. |100° C.|Material. | DR ------+--------------------+---+---+---+---+----+-------+---------------+---- 1889 | |ton|cwt|qrs|lbs| | | | Feb. 1|Tough cake copper | | | | | 482| |Arsenic, 0.52% | 7 " |Tough cake copper | | | | |2082| |Arsenic, 0.63% | 7 " |Tough cake copper | | | | | 491| |Arsenic, 0.68% | 7 | | | | | | | | | Feb. 2|Nickel disc for C.R.| | | | | X | |Copper, 73.75 | 7 | | | | | | | |Nickel, 24.34 | | | | | | | | |Iron, 2.18 | | | | | | | | | ----- | | | | | | | | | 100.27 | | | | | | | | | ------ | " |Silver precipitate, | | 24| 1| 0| 73| Not | | | 4 casks | | | | | | det. |Silver, 4.851 | 10 | | | | | | | |Gold, 0.0215| | | | | | | | |Lead, 19.37 | | | | | | | | |Zinc, 2.00 | | | | | | | | |Silver, 1584.7 | | | | | | | | | ozs. per ton | | | | | | | | |Gold, 7.0 | | | | | | | | | ozs. per ton | " |Purple ore |200| | | | 494| Not |Copper, 0.13% | 11 | | | | | | | det. |Sulphur 0.15% | ------+--------------------+---+---+---+---+----+-------+---------------+----
When the number of samples is small, the Sample Book may be omitted, and the entries made in the Assay Book as the samples arrive.
Report-forms. These should entail as little writing as possible in making out the report. For general purposes the form given on p. 12 is useful.
~The quantity of substance~ to be taken for any particular assay depends largely upon the method of assay adopted. There are, however, some general considerations which should be remembered, and some devices for simplifying the calculations which should be discussed.
The smaller the percentage of the substance to be determined, the larger should be the amount of the ore taken. The following table will give a general idea as to this:--
Percentage of the substance Amount of ore, &c. to
to be determined. be weighed.
100-10 1 gram.
10-5 2 grams.
5-1 5 "
1-0.1 10 "
0.1-0.01 20 "
ASSAY NOTE
The rougher the method of assay adopted, the larger should be the quantity of ore taken. If the degree of accuracy attainable with the methods and instruments at the assayer's service is known, it is easy to calculate what quantity should be taken for any particular case. If the results are good within 0.001 gram, then, taking 1 gram of ore we can report within 0.1 per cent., or if they are good within 0.0002 gram, taking 20 grams of ore, we can report within 1 part per 100,000, or very closely within 6-1/2 dwt. to the ton. If it is wished to be yet more particular in reporting, larger quantities must be taken. The difficulty of manipulating very small or very large precipitates, &c., must be borne in mind. So, too, must the fact that the greater the weight of the final product of an assay, the less, as a rule, is the percentage error. The distinction between absolute and percentage error, often overlooked, is important. If 0.5 gram of silver be cupelled with 20 grams of lead, there may be obtained a button of 0.495 gram; the absolute loss is 0.005 gram, and this equals 1 per cent. of the silver present. Similarly, cupelling 0.1 gram, the resulting button may be 0.098; the absolute loss is only 0.002 gram, but this equals 2 per cent. of the silver present. In the same way the student should see that the two results, 91.5 per cent. and 92.0 per cent., are really more concordant than the results 9.1 per cent. and 9.2 per cent.
A device often adopted in practice where a large number of assays of one kind are made, and the report is given as so many ounces or pounds to the ton, is that known as the assay ton. The assay ton may be any arbitrary and convenient weight, but its subdivisions must bear to it the same relations as pounds and ounces bear to the actual ton. On the other hand, in a laboratory where many kinds of work are performed, different sets of weights of this kind would only tend to confusion, even if they were not unnecessary. With a set of gram weights and its subdivisions anything may be done. If it is desired to report as pounds to the ton, then, since there are 2240 lbs. to the ton, a weight of 2.240 grams may be taken as the assay ton, and each 0.001 gram yielded will equal 1 lb., or 22.4 grams may represent the ton, and each 0.01 gram a pound. Similarly, since there are 32,666.6 ozs. troy to the ton; if we take 32.6667 grams as the assay ton, each 0.001 gram will equal 1 oz. to the ton. In some cases it may be convenient to have, in addition to the usual gram weights, one or other of the "assay tons" mentioned above, but generally it is better to work on a purely decimal system, and convert when required into ounces per ton, &c., either by actual calculation or by reference to a set of tables.
PRACTICAL EXERCISES.
The student should practise such calculations as the following:--
1. Calculate the percentages in the following cases:-- (a) Ore taken, 2 grams; copper found, 0.2155. (b) " 1.5 gram; iron found, 0.8340. (c) " 30 grams; lead found, 23.2.
2. Calculate the parts per thousand in the following:-- (a) Bullion taken, 1.1 gram; silver found, 1.017. (b) " 1.14 gram; silver found, 1.026. (c) " 0.6 gram; gold found, 0.5500.
3. Calculate parts per 100,000 in the following:-- (a) Ore taken, 20 grams; silver found, 0.0075. (b) " 50 grams; gold found, 0.0026. (c) Water taken, 500 c.c.; solids found, 0.1205.
4. Calculate cwts. to the ton in the following:--
(a) Ore taken, 5 grams; tin found, 2.816.
(b) " 5 grams; tin found, 3.128.
(c) An ore with 68.2 per cent. of tin.
5. Calculate lbs. to the ton in the following:-- (a) An ore with 3.28 per cent. oxide of tin. (b) Ore taken, 20 grams; oxide of tin found, 1.67.
6. Calculate ozs. (troy) to the ton in the following:-- (a) Ore taken, 50 grams; gold found, 0.0035. (b) " 20 grams; silver found, 0.0287. (c) " 25 grains; silver found, 0.0164.
7. Calculate in grains per gallon:-- (a) 0.51 gram per litre. (b) 24.6 parts per 100,000. (c) Solution taken, 100 c.c.; copper found, 0.0045 gram. (c) " 50 c.c.; iron found, 0.165 gram.
8. Convert into ozs. (troy) per ton:--
(a) 7 loths per centner.
(b) 30 grams per quintal.
(c) 15 parts per 100,000.
FOOTNOTES:
[1] Ether or carbon bisulphide.
[2] Such substances are best dried by pressing between folds of dry filter-paper.
CHAPTER II.
METHODS OF ASSAYING.--DRY GRAVIMETRIC METHODS.
The methods of assaying are best classed under two heads, Gravimetric and Volumetric, in the former of which the final results are weighed, whilst in the latter they are measured. A commoner and older division is expressed in the terms much used in practice--wet assays and dry assays. Wet assays include all those in which solvents, &c. (liquid at the ordinary temperature), are mainly used; and dry assays, those in which solid re-agents are almost exclusively employed. Dry assays form a branch of gravimetric work, and we shall include under this head all those assays requiring the help of a wind furnace. Wet assays, as generally understood, would include not only those which we class as wet gravimetric assays, but also all the volumetric processes.
~Gravimetric Methods~ aim at the separation of the substance from the other matters present in the ore, so that it may be weighed; and, therefore, they must yield the whole of the substance in a pure state. It is not necessary that a metal should be weighed as metal; it may be weighed in the form of a compound of definite and well known composition. For example, one part by weight of silver chloride contains (and, if pure, always contains) 0.7527 part of silver; and a quantity of this metal can be as exactly determined by weighing it as chloride as by weighing it in the metallic state. But in either case the metal or its chloride must be pure.
Exact purity and complete separation are not easily obtained; and methods are used which are defective in one or both of these respects. It is well to note that an impure product increases the result, whilst a loss of the substance decreases it; so that if both defects exist in a process they tend to neutralise each other. Of dry methods generally, it may be said that they neither give the whole of the substance nor give it pure; so that they are only calculated to show the amount of metal that can be extracted on a manufacturing scale, and not the actual quantity of it present. Their determinations are generally rough and always low. The gold and silver determinations, however, will compare very favourably with any of the other processes for the estimation of these metals in their ores.
The calculation of the results of a gravimetric assay has already been referred to. If the result is to be stated as percentage, it may always be done by the following rule:--Multiply the weight of the substance got by the percentage of metal it contains, and divide by the weight of ore taken.
Gravimetric methods are divided into three groups: (1) mechanical separations; (2) dry methods; and (3) wet methods.
~Mechanical Separations.~--Under this head are classed the method of assaying tin ores, known as vanning, and the amalgamation assay for gold. A set of sieves to determine the relative proportion of powders of different degrees of fineness is sometimes useful. A set with 10, 20, 40 and 80 meshes to the inch is convenient.
~Dry Assays.~--An important distinction between wet and dry methods of assaying is, that in the former the substance is got into the liquid state by solution, whilst in the latter fusion is taken advantage of.
The difference between solution and fusion is easily illustrated: a lump of sugar heated over a candle-flame melts or fuses; suspended in water it dissolves. Many substances which are insoluble or infusible of themselves, become soluble or fusible when mixed with certain others; thus, in this way, solution is got with the aid of reagents, and fusion with the help of fluxes. For example, lead is insoluble in water, but if nitric acid be added, the metal rapidly disappears. It is convenient, but somewhat inaccurate, to say that the acid dissolves the lead. If the lead be acted on by nitric acid alone, without water, it is converted into a white powder, which does not dissolve until water is added; in this case it is obvious that the water is the solvent. The function of the acid is to convert the lead into a soluble compound.
~Fluxes~ may act as true solvents. Fused carbonate of soda dissolves baric carbonate, and perhaps in many slags true solution occurs; but in the great majority of cases a flux is a solid reagent added for the purpose of forming a fusible compound with the earthy or stony minerals of the ore. Few of the minerals which occur in the gangue of an ore are fusible; and still fewer are sufficiently fusible for the purposes of the assayer, consequently the subject is one of importance, and it ought to be treated on chemical principles. An idea of the composition of some of the more frequently occurring rocks may be gathered from the following table, which represents rough averages:--
----------------------------------------------------------------- | | |Oxide|Lime and | |Silica.|Alumina.| of |Magnesia.|Alkalies. | | |iron | | ----------------------------------------------------------------- | % | % | % | % | % Sandstone, grit, | | | | | quartzite, &c. |80-100 | -- | -- | -- | -- Granite, gneiss, | | | | | quartz-porphyry, | | | | | fire-clay, &c. | 70-75 | 13-20 | 2 | 2 | 5-8 | | | | |Less in | | | | |fire-clay. Mica-schist | 65 | 18 | 5 | 3 | 3 Trachyte, syenite | 60 | 17 | 7 | 4-7 | 6-9 Clay-slate | 60 | 18 | 10 | 8 | 3 Diorite | 54 | 17 | 12 | 9 | 3-4 Horneblende-rock | 50 | 18 | 15 | 12 | 3-4 Brick-clay | 50 | 34 | 8 | 6 | -- China-clay | 47 | 39 | -- | -- | -- Basalt, dolerite, &c.| 50 | 15 | 15 | 16 | 3 Serpentine | 44 | -- | -- | 44 | -- Chalk, limestone, | | | | | dolomite, &c. | -- | -- | -- | 45-55 | -- -----------------------------------------------------------------
Silica itself, and the silicates of alumina, of lime, and of magnesia, are practically infusible; the silicates of soda, of potash, and of iron are easily fusible if the base (soda, potash, or oxide of iron) be present in sufficient quantity, and if, in the case of the iron, it is present mainly as lower oxide (ferrous silicate). The addition of lime, oxide of iron, or alkali to silicate of alumina results in the formation of a double silicate of alumina and lime, or of alumina and iron, &c., all of which are easily fusible. Similarly, if to a silicate of lime we add oxide of iron, or soda, or even alumina, a fusible double silicate will be formed. Thus lime, soda, oxide of iron, and clay, are fluxes when properly used; but since lime, clay (and oxide of iron if there be any tendency to form peroxide), are of themselves infusible, any excess of these fluxes would tend to stiffen and render pasty the resulting slag. So, too, soda, which is a very strong base, may act prejudicially if it be in sufficient excess to set free notable quantities of lime and magnesia, which but for that excess would exist in combination as complex fusible silicates. There are many minerals which with but little soda form a glass, but with more yield a lumpy scoriacious mass. There are many minerals, too, which are already basic (for example, calcite), and which, when present, demand either a less basic or an acid flux according to the proportions in which they exist. For purposes of this kind borax, or glass, or clay with more or less soda may be used, and of these borax is by far the most generally useful. An objection to too basic a slag (and a very important one) is the speed with which it corrodes ordinary crucibles. These crucibles, consisting of quartz and clay, are rapidly attacked by lime, soda and bases generally.
FIG. 4.